Ruger 10/22

[elvolcan 0]

My CZ .17HMR I made the trigger alot lighter with the Eric Brooks Trigger kit for £10.

 

Is there anything similar for the 10/22? To get it to about 2lbs (its like 5-6lbs at the moment)

 

What do I need ?

 

 

 

Thanks

[the Verminator 0]

http://www.rimfiremagic.co.uk/trigger_kits.html

 

this should do the trick

[elvolcan 0]

http://www.rimfiremagic.co.uk/trigger_kits.html

 

this should do the trick

I have had a look at that allready

Ruger 10/22

Undoubtedly our most sought after trigger upgrades, with the following parts available for DIY installation:

Power Custom competition hammer with extra power hammer spring .....£29.00

Power Custom hammer & sear pack (with springs as above plus hammer & sear shims) ........£50.00 Please note: we are now supplying this kit as an adjustable version, not to adjust the trigger pull weight, but to give you the option to retain the normal two stage Ruger 10/22 trigger pull, or alternatively to adjust the pretravel to give a virtually single stage trigger pull. NB! We are now using these parts in our custom rifles. The sear MAY require a bit of filing and fitting to allow the safety to operate.

 

Dont understand much of that :icon_redface:

 

What do I need to get the trigger lighter, for the cheapest cost, and simplest solution to install and use ?

 

Is there one like the eric brooks , which i found cheap and really good.

 

Do i need to replace the entire trigger unit , or what do i do ?

 

 

 

Jusy sent them this as well

Hi

I have a Ruger 10/22 Semi Auto .22LR

The trigger pull on it though is too heavy, I would prefer it at about 2lbs.

What can I get, and how do i install it?

I had a trigger kit by eric brooks for my cz .17hmr and it was very good, cheap and easy to install - any like that for the ruger 10/22 ?

Edited May 25, 2009 by elvolcan

[the Verminator 0]

i dont under stand it either mate, they built me a rifle a i can recomend their own trigger, but you dont want a new trigger so i dont know what to recomend. they will sort you out anyway. they are brilliant there. i also see Mr Logic has had very good customer services form there as well

[Mr_Logic 5]

You can get a Kid trigger kit for the 10/22 which is fantastic - puts Anschutz triggers to shame. It's a whole drop in unit so you just replace the factory one in its entirety - no messing about. It's not cheap, but very good.